89-94 Isuzu pick-up tail lights

In this page we will illustrate how to install aftermarket tail lights on 1989-1994 Isuzu pick-ups.

 As you can see on this image, this particular truck had a broken tail light lens, giving us the perfect opportunity to upgrade to a custom set of tail lights.

Start by removing the four phillips screws located on all four corners as seen on the image.






















 Next, gently pull the tail light assembly away from the body, turn it sideways and unplug the electrical connector by depressing the plastic tab and pulling the connector at the same time.






















 Connect the new tail light connector to the truck electrical harness and position the new tail light assembly in place.
























 Install the four phillips screws and tighten them gently.




























 Turn the ignition key on without starting the engine and place the truck in reverse, turn the lights on and turn the emergency flashers on, verify that all the lights turn on, if they do you are done with this side, repeat the same procedure on the opposite side and you are done.